"White Color-Shock" Sticker Overlay for Roland P-6 Creative Sampler

Product Description:
This product is a custom designed and manufactured adhesive-backed 5-piece label kit for the Roland P-6 Creative sampler.
 
This overlay kit is intended to be a handy cheat-sheet reference with most of the device's control combinations and shortcut functions readily available.
 
Here are the primary features of the overlay design:
Background color-coding is used to indicate the major interface sections (Bus FX, Voice, Banks, etc.).  
Color-coding is used to help identify control combinations:  Shift, Pattern, Sampling, Voice, Filter, Mixer, MFX, Granular, etc.)
Flowchart to visualize the sampler's basic signal flow and control routings
Procedures for recording new samples, Step Sampling, and assigning samples to the Granular pad
Start-up hold button procedures for transfering files between the sampler and a connected computer, checking & updating firmware, factory reset, and restore after reset 
Basic functions for the 'Step Input Record' sequencing mode
Basic Step Edit sequencer functions
Guide for assigning bus routings (Bus A, Bus B, Bus FX) and setting bus volumes
Ordered list of menu functions is shown in the top-left corner of the overlay to help navigate the list of items
Ordered list of all Sample Edit submenu items (Pitch Envelope, Filter, Voice, Mixer) as well as  Reveb and Delay menu items.
Table showing all CTRL 1-3 knob functions and shift+knob functions for all the Bus FX algorithms
Numbers for the 1-16 buttons for quicker Pattern number selection
MFX effects shortcuts for the 1-15 buttons
 
The artwork is printed using a high-quality commercial printing process to provide the best resolution and color saturation. A glossy topcoat lamination is then applied in order to improve contrast and provide physical protection for the printed image.  Holes have been cut for all of the front panel buttons, dials, and LEDs. When properly installed the overlay will not interfere with any of the synthesizer’s functions (see installation instructions below for details).
 
Installation:
If your synthesizer is very dirty, you may want to clean it with a soft cloth before installing the overlay. You may also want to wash your hands with soap and water before installing the overlay to prevent getting oils or debris on the adhesive.
 
To install the overlay, simply peel off the overlay’s backing, and place the overlay onto your synthesizer.  If you are not happy with the alignment, you can remove the overlay and reposition it as necessary.  See product photos for the intended label locations.  Note the orientation of the label on the understide of the sampler -- the power switch should be facing you when applying the underside label.
 
Manufacturing Info: 
Our products are manufactured in small batches based on customer demand.  This product is made in the USA and ships from Portland, Oregon, USA.
 
This is an aftermarket product. The product includes the adhesive overlay kit only and does not include a Roland P-6 Creative Sampler. Oversynth is in no way affiliated with Roland Corporation.