"Default TMI" Sticker Overlay for Chase Bliss Mood MK2

Product Description:
This product is a custom designed and manufactured adhesive-backed overlay sticker / skin for the Chase Bliss Mood MK2 effects pedal.
 
Here are a few of the features of the overlay design:
Color-coding is used to indicate the two sides/channels of the pedal (Wet Channel and Microlooper Channel)
Contextual knob functions are labeled and color-coded.  For example, the 'Modify' knob on the Wet Channel controls 'Speed/Direction' when the channel is in 'Slip' mode.  The same knob controls 'Feedback' when the channel is in Delay mode.
'Hidden Functions' are labeled next to the corresponding control, as well as instructions on how to access the Hidden Functions.
Instructions for storing presets are shown
Ramp wave shapes (adjusted as a Hidden Function) are shown around the 'Mix' knob
Functions of the left and right foot-switches are shown
Cable types (TRS, TS, etc.) are indicated next to the corresponding jacks
Dip switch functions are labeled
Brief explanations of the functions of each of the DIP switches are given
Dial position markers are provided for all knobs.  In addition to being a visual aid while using the pedal, the markers can also be used to align the knobs if they ever have to be removed and re-installed.
 
The artwork is printed using a high-quality commercial printing process to provide the best resolution and color saturation. A glossy topcoat lamination is then applied in order to improve contrast and provide physical protection for the printed image.  Holes have been cut for all of the front panel buttons, dials, and LEDs. When properly installed the overlay will not interfere with any of the device's functions (see installation instructions below for details).
 
Installation:
If your pedal is very dirty, you may want to clean it with a soft cloth or an isopropyl alcohol wipe before installing the overlay. You may also want to wash your hands with soap and water before installing the overlay to prevent getting oils or debris on the adhesive.
 
To install the overlay, simply peel off the overlay’s backing, and place the overlay onto your clean and dry pedal.  Due to the limited space on the pedal's front panel, some of the holes are sized to be a tight fit over the front panel knobs.  In our tests, we did not need to remove the knobs in order to install the overalay.  If you feel the need to remove your pedal's knobs (if you have different knobs than the ones shown in the photos for example), then you can use the overlay's dial markers to help allign the knobs when re-installing them.  If you are not happy with the alignment of the overlay, you can remove it and reposition it as necessary (be careful not to rip the overlay in the corners).
 
Manufacturing & Shipping Info: 
Our products are manufactured in small batches based on customer demand. Most orders are shipped within 1-2-weeks following payment.  If a shipment delay is expected, then we will contact you to provide an update on your order.  This product is made in the USA and ships from Portland, Oregon, USA.
 
This is an aftermarket product. The product includes the adhesive overlay kit only and does not include a Chase Bliss Mood MK2 pedal. Oversynth is in no way affiliated with Chase Bliss or Chase Bliss Audio..